booster
Single diaphragm boosters are compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Zinc chromate finish. The single diaphragm is usually used on lighter vehicles. In the heavier applications of 3000-3500 pounds or more we normally use the dual diaphragm boosters.
You will need full manifold vacuum available to the booster. Manufacturer requirements vary between 18 and 20 inches of vacuum. With radical cams there are many cases where there is a loss of the necessary vacuum and the only option is a 12 volt vacuum pump available from Speedway under part number
O.D. is 7" Length from mount surface to master cylinder mount surface is 3-5/8" (this does not include the shoulder that extends into the master cylinder)
3/8 x 24 thread pushrod that is 4" long from mount surface to end of the threads (pushrod nut included)
4 bolt mount pattern on 3-3/8" centers
Mount bolts are 5/16 x 20 and 7/8" long and nuts are included
Master cylinder mount studs are 3/8 x 18 and 1-1/16" long and 3-3/8" on center
